PRODUCTS
EOP 8E1/Ethernet(fiber) Converter
EOP 8E1 to ETHERNET (FIBER) converter realizes Ethernet transmission over 1~4E1. 4 Ethernet ports are available including 3xelectrical and 1xoptical Ethernet ports. This device adopts with international standard protocol (G.7041、G.7042、G.7043、G.8040) at all layers and able to intercommunicate with third party products followed same standard.
Technology Characteristics:
|
E1 interface |
E1: 8 E1 channel for 8E1 |
|
Electric characteristic: comply with ITU-T G.703 standard |
|
|
Jitter index: comply with ITU-TG.823 standard |
|
|
Connector: DB37. RJ45(120Ω) or BNC(75Ω) optional by adaptors |
|
|
Ethernet interface |
4 interfaces with VLAN |
|
Comply with IEEE802.1Q |
|
|
Auto adapt 10/100M full/half duplex |
|
|
Connector: 3 interface with RJ-45, one interface with fiber ports |
|
|
MAC address table capability: 1024 |
|
|
MAC address table aging time: 5 minutes |
|
|
Minimum frame length: 64 bytes |
|
|
Maximum frame length: 1916 bytes |
|
|
Optical interface |
Default: dual fiber, single mode, 40km |
|
Power supply |
Voltage: AC220V and DC-48V |
|
Power consumption: less than 10W |
|
|
Environment |
Operating temperature: -5℃~50℃ |
|
Storage temperature: -40℃～70℃ |
|
|
Relative humidity: ≤95％, non-condensing |
Typical Application Diagram
Contact Us
Address: East Anningzhuang Rd.,Haidian District, Beijing, China
Tel: +86-10-62924922/62926577
Fax: +86-10-62922921
E-mail: human@hm-it.com
Copyright@ Beijing Human Information Technology Co., Ltd 京ICP备13001393号-1 SEO label
Scan to focus wechat
Scan to view mobile website
